Skip to content Black FridayUp to 76% off Vitals, Levers and SoundBar, until 5 December
Vitals · Temperature and fans

Check your Mac’s temperature and control its fan speed

Vitals shows the CPU and GPU temperature, the other sensors and the speed of every fan, on Intel and Apple silicon Macs. When the Mac runs hot it names the apps responsible. You can leave the fans to macOS, hold them at a speed, or have them follow a curve.

The Vitals Fans tab: CPU, GPU and hottest-sensor temperatures, a fan curve that follows the CPU with Quiet, Cool and Your Own presets, two rules, eight sensors and the last 24 hours of temperature and fan speed

Temperatures and fan speeds in one tab

The Fans tab lists every sensor and every fan, in the window and in the menu bar dropdown, where a Sensors tile shows them too. On a Mac without fans the tab is called Temperature. Activity Monitor shows neither temperature nor fan speed.

It works on Intel Macs and on every Apple silicon Mac, M5 included. The readings are most detailed on Apple silicon. Choose Celsius or Fahrenheit in Settings → General → Units.

Temperature is part of the history, and the Peaks card shows the highest temperature in a range and when it was.

The apps behind the heat

When the Mac has been hot for a few minutes, Vitals names the apps that have been working the chip, highest first, with Quit beside each and Force Quit for one that does not answer. It also says how fast the fans are running. How hot, and for how long, is set in Settings → Insights.

If kernel_task is using a lot of CPU on a hot Mac, that is macOS cooling the chip by taking CPU time from everything else. It is a symptom. The cause is the app Vitals names.

A Vitals notice that the Mac has been hot for 4 minutes at 92°, with the fans at 5,100 rpm and Xcode, Google Chrome and Zoom listed with Quit beside each

Four ways to run the fans

Automatic leaves the fans to the Mac. Fixed holds them at a speed, with a slider for each fan within the speeds that fan supports. Curve ties fan speed to a temperature: pick the CPU, the GPU, the hottest sensor or the battery, start from the Quiet or Cool preset, and drag the points. Max runs the fans flat out for 5, 15 or 30 minutes, or until an app is done.

Two rules can change the curve for you. One switches to Cool while apps you pick, such as Xcode or Final Cut Pro, work hard, and goes back once the app has been quiet for a minute. The other switches to Quiet on battery. The speed each fan was set to is shown beside the speed it is turning at.

  • A curve and Max run every fan together, each within its own range
  • Cool while apps work hard also works on Automatic
  • A fixed speed or a curve is kept across restarts and sleep
  • Shortcuts actions: Set the Fans, and Run the Fans at Full Speed

Limits that keep it safe

Vitals only sets speeds inside the range each fan supports. A curve runs the fans at full speed above 95 °C, and hands them back to macOS if macOS reports that the Mac is running very hot. Every fan returns to automatic when Vitals quits.

Fan control needs Full System Metrics, the optional helper. On a Mac without fans there is nothing to control.

Temperature in the menu bar

A temperature item can follow the CPU, the GPU or the hottest sensor. It turns red while the Mac is hot, and the fan speed can sit beside it.

A menu bar with the temperature in red at 91° and the fan speed beside it, above the setting for whether temperature follows the CPU, the GPU or the hottest sensor

How to use it

  1. 1

    Open the Fans tab

    It is in the window and in the dropdown, with every sensor and fan. On a Mac without fans, look for Temperature.

  2. 2

    Turn on Full System Metrics

    Setting fan speeds needs this optional helper. It sets speeds only within the range each fan supports.

  3. 3

    Choose Automatic, Fixed or Curve

    For a curve, pick the sensor it follows, start from Quiet or Cool, and drag the points to make your own.

  4. 4

    Use Max for a short while

    Run the fans at full speed for 5, 15 or 30 minutes, or while an app works.

  5. 5

    Add the temperature to the menu bar

    In Settings → Layout → Menu Bar, add a temperature item and choose what it follows.

The details

Macs
Intel and Apple silicon, M5 included
Fan modes
Automatic, Fixed, Curve, and Max for 5, 15 or 30 minutes or while an app works
A curve can follow
The CPU, the GPU, the hottest sensor or the battery
Presets
Quiet and Cool, or your own points
Safety
Full speed above 95 °C, and back to automatic when Vitals quits
Needs
Full System Metrics, the optional helper, for fan control
Units
Celsius or Fahrenheit, in Settings → General → Units

Questions

Does Vitals show temperatures on Apple silicon?

Yes, on every Apple silicon Mac, M5 included, and on Intel Macs. The readings are most detailed on Apple silicon.

Can I set each fan separately?

In Fixed, yes: each fan has its own slider within the speeds it supports. A curve and Max run all the fans together, each within its own range.

Is fan control safe?

Vitals only sets speeds within each fan’s supported range. A curve goes to full speed above 95 °C and gives the fans back to macOS if macOS says the Mac is very hot. All fans return to automatic when Vitals quits.

Does the fan setting survive a restart?

Yes. A fixed speed or a curve is kept across restarts and sleep.

Why is my Mac hot?

Usually an app is keeping the CPU or GPU busy. Vitals names the apps behind the heat, with Quit beside each.

The same feature on the app's own site: vitalsmac.com/features/temperature-and-fans

Find the app behind every number.